Thecus N2800 User Manual page 43

Link1 Configuration
Status
Jumbo Frame Support
Link Type
IPv4/IPv6
Mode
IP
Netmask/Prefix Length
Gateway
Default gateway
Now under the networking, a "Link1" tab will appear from the network title bar.
Specifies the network ports being used with the associated link aggregation.
Click on to modify the selected network ports.
Enable or disable Jumbo Frame Support of the associated interface on your
Thecus IP storage.
Select from drop down list for desired mode.
Click to enable IPv4/IPv6 for TCP/IP. The default is IPv4 enabled.
It has to be a static IP with the link aggregation being used.
IP address of link aggregation.
Input netmask for IPv4 and Prefix length for IPv6.
Gateway for associated link aggregation
It can be chosen from the drop down list of default gateway being used for
the Thecus IP storage.
43