Bad Block Scan; Raid Information - Thecus N0204 User Manual

Test Result
Test Time
NOTE

Bad Block Scan

On the Disks Information screen, you may also perform disk bad block scan,
simply to click "Click to start" to start with. The result is only for reference and
system will not take any action from its result.
The testing result will be stay till system reboot with "Yet to start" displayed as
default.

RAID Information

From the Storage menu, choose the RAID item and the RAID Information screen
appears.
This screen lists the RAID volumes currently residing on the Thecus IP storage. From
this screen, you can get information about the status of your RAID volumes, as well
as the capacities allocated for data, and iSCSI. There is also a graph which
represents how the RAID volume is currently allocated.
RAID Information
Item
ID
RAID Level
Status
Disks Used
Total Capacity
Data Capacity
Result of the test.
Total time of the test.
If the Reallocated Sector Count > 32 or Current Pending Sector of a hard disk
drive > 0 , the status of the disk will show "Warning". This warning is only used
to alert the system administrator that there are bad sectors on the disk, and
they should replace those disks as soon as possible.
Description
ID of the current RAID volume.
NOTE: All RAID IDs must be unique.
Shows the current RAID configuration.
Indicates status of the RAID. Can read either Healthy,
Degraded, or Damaged.
Hard disks used to form the current RAID volume.
Total capacity of the current RAID.
Indicates the used capacity and total capacity used by user data.
53