Link Aggregation
The Thecus IP storage supports link aggregation from on board network port .
Simply click on "Add" from Link Aggregation page and screen appear as below.
Click on field of "Link Aggregation Combination Device" to select member for Link
Aggregation. And also fill in all other required information to complete the setting.
Link Aggregation Configuration
Jumbo Frame Support
Aggregation Mode
IPv4/IPv6
Mode
IP
Netmask/Prefix Length
Gateway
Click "Apply" to confirm the setting. The newly created Link Aggregation will appear
on associated device list
Enable or disable Jumbo Frame Support of the associated
interface on your Thecus IP storage.
Select from drop down list for desired mode.
Click to enable IPv4/IPv6 for TCP/IP. The default is IPv4
enabled.
It has to be a static IP with the link aggregation being used.
IP address of link aggregation.
Input netmask for IPv4 and Prefix length for IPv6.
Gateway for associated link aggregation
37