Power Save; Setting Time - Wildgame N6E User Manual

Power Save

1.
After 30 seconds without any buttons
being pushed, the LCD will turn off and
camera enters into Power Save or
Ready Mode.
2.
The LCD screen can be awakened by
pressing the Power button briefly.
Note: The LCD will not "wake up" when
camera is writing to memory.

Setting Time

1.
To change date and time, start by
pressing and release the center
navigation button to set the hour.
POWER
POWER
2.
Press the left or right navigation
button to go up or down in sequence.
POWER
POWER
3.
When the hour is set, repeat steps 1
and 2 to set the minutes.
page 6