Advertisement
Advertisement
Related Manuals for Wildgame I6
Summary of Contents for Wildgame I6
- Page 1 Infrared Digital Scouting Camera User’s Manual Model # I6...
- Page 2 Includes User Manual USB Cable 2 - Bungee Cords Flextime Player Camera Unit Software NOTE: Flextime Player Software is optional. Flextime files can be played by using most media players. page 1...
- Page 3 Features RESOLUTION MAX: 6 MP Still FLASH 18 High Intensity Infrared LED’s FLASH RANGE up to 55 feet SENSOR Passive Infrared Sensor (PIR) Motion and Heat SENSOR RANGE up to 60 feet IMAGE FORMAT JPEG - Digital Stills/ AVI-Digital Video MEMORY up to 32GB SD Card (not included and required) Class 4 and above recommended...
- Page 4 Installing Batteries With the bottom of the camera Open the door at the bottom of the camera by unlatching the towards you, load two C-cell batteries with the positive ends towards you in locking tab. the left battery chamber and load two C-cell batteries with the negative ends towards you in the right battery chamber.
- Page 5 Close battery compartment cover. To Load SD memory card (up to 32GB not latch the cover simply pull the latch into the SD card slot with included) slightly to the left as you close the the connectors facing up. battery compartment cover. TIPS: Make sure the SD Card is unlocked (small switch on the side of the SD Card)
- Page 6 Power On Test Mode To turn the unit ON, press and LCD Ready Mode: The camera release the power button. will automatically enter Ready Mode if a button is not pressed for greater than 30 seconds. The status lights will illuminate for a total of 2 minutes.
- Page 7 Power Save Setting Time To change date and time, start by After 30 seconds without any pressing and release the center buttons being pushed, the LCD navigation button to set the hour. will turn off and camera enters into Power Save or Ready Mode. Ready Time/Date Location...
- Page 8 Setting Date Location Press center navigation Save the location of the area the camera was installed. This is for your reference and is button after setting the minute to optional. If you do not wish to name your location change the Day. skip to the next step.
- Page 9 Trigger Flextime This setting allows you to choose the mode in Press the center navigation button which the camera will be capturing images. while Flextime is selected. The Ready highlighted option will be blinking. Press the center navigation button Time/Date Location while Trigger is selected.
- Page 10 FLEXTIME selected Camera is inactive before and after Flextime periods. Flextime period: Flextime is active twice a day. 1. 15 min before Sunrise 15 MINUTES 15 MINUTES AFTER BEFORE to 1 hour after Sunrise. SUNSET FLEX FLEX SUNRISE INACTIVE TIME TIME INACTIVE 2.
- Page 11 PIR Mode PIR Active Press center navigation Press center navigation button while Mode button while Active selected. The highlighted option selected. The highlighted option Ready Ready will be blinking. will be blinking. Time/Date Time/Date Location Location Trigger PIR Mode Flextime Both Trigger PIR Mode...
- Page 12 Power Off Delay Press the center navigation button To turn the unit off, first wake up while Delay is selected. The Ready the LCD screen and then depress Time/Date highlighted option will be blinking. and hold the power button until Location Trigger PIR Mode...
- Page 13 Then, stretch and use a Wildgame Innovations the cords around the tree and latch 6 Volt camera battery accessory. the other ends of the bungee cords through the mounting holes on the opposite side of the camera.
- Page 14 Important Once you connect the camera to your computer via the USB cable/ports, the camera will then draw power from the computer. When completing the viewing, transferring, copying or deletion of images, please make sure that you DISCONNECT THE USB CABLE FROM BOTH THE CAMERA AND THE COMPUTER, as you will not be able to power the camera OFF until you do so.
- Page 15 Warranty DISCLAIMERS WGI Innovations, LTD. is not responsible for damage, expense or injury caused by the unauthorized use of, alterations to, improper connection of and abuse or neglect of the WGI Innovations™ products. WARRANTY For the warranty to be in e ect, you MUST completely ll out and mail the warranty card along with your proof of purchase to WGI Innovations within (14) days after the date of purchase.
- Page 16 Retrieving Images (SD Card in Camera) Method 1: Leave SD card in camera Please select Removable Disk from this menu (or double click on the graphical A. First, make sure that the camera is icon). powered OFF. Next, plug the USB cable into F.
- Page 17 Retrieving Images (SD Card reader) Method 2: Remove SD card and use card left of your screen and select “Com- reader puter”. The summary view will then be illustrated on the right hand side of the A. First, remove the SD Card from the camera window where by the “Devices with unit itself by pressing on it to where it Removable Storage”...
- Page 18 FCC STATEMENT Product Name: Game Trail Camera Trade Name: Wildgame Innovations Model# I6 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
- Page 19 page 18...
- Page 20 602 Fountain Parkway Grand Prairie, TX 75050 800.847.8269 “Wildgame Innovations” and the “Button Logo” are TM trademarks of Wildgame Innovations, LLC. “Sport Responsible” , “Redux” and “Flextime” are TM trademarks of WGI Innovations, LTD.