Trigger; Flextime - Wildgame N6E User Manual

Trigger

1.
Press the center navigation button
while Trigger is selected. The
highlighted option will be blinking.
POWER
OWER
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
POWER
OWER
TRIGGER:
PIR MODE: Takes a photo or video only
when the PIR sensor is triggered.

FLEXTIME

(Time Lapse)
images at set intervals during the key
movement periods of the day, depending
on your Flextime settings.
BOTH: Both PIR and Flextime are active.
: Takes time lapse
1.
Press the center navigation button
while Flextime is selected. The
highlighted option will be blinking.
POWER
POWER
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
POWER
POWER
The Interval setting is set by the Delay
Setting on the camera with a 1 minute
minimum Flextime delay. See chart on
the next page for Flextime options.
NOTE: Camera needs at least 48 hours
in the field to acclimate to the environ-
ment for Flextime to function properly.
Flextime
page 8