ESI IVX X-Class User Manual page 84

Using Esi-Link
Call forwarding
Here's how to program call forwarding to a remote location extension, mailbox, or department.
On the 24-Key Feature Phone
1. Either:
(a.) Press a programmed call-forwarding key and a programmable feature key you have already set
for the desired destination (whether it is an extension, a mailbox or a department).
or
(b.) Dial the call-forwarding feature code (5 6 5), press the Location Key and then dial the desired
extension, mailbox, or department.
For instance, to forward to extension 112 in Chicago (location 702 in this example), dial 5 6 5, press
the Chicago Location Key and then dial 1 1 2.
Alternatively, you could dial 5 6 5 7 0 2 1 1 2 — i.e., 565 (call forwarding) + 702 (the location) + 112
(the extension).
2. To cancel call forwarding, either:
(a.) Press the programmed call-forwarding feature key and then press RELEASE.
or
(b.) Dial 5 6 5 .
On the 48-Key Feature Phone
1. Press CFWD.
2. Either:
(a.) Press a programmable feature key you have already set for the desired destination (whether it
is an extension, a mailbox or a department).
or
(b.) Press the Location Key and then dial the desired extension, mailbox, or department.
For instance, to forward to extension 112 in Chicago (location 702 in this example), press CFWD,
press the Chicago Location Key and then dial 1 1 2.
Alternatively, you could press CFWD and dial 7 0 2 1 1 2 — i.e., 702 (location) + 112 (extension).
2. To cancel call forwarding, press CFWD.
Note (for either phone):
Incoming calls that are forwarded when the remote location extension is busy or does not answer will be
sent to the call-forwarding destination of the original extension's mailbox. If you regularly forward to a
particular remote location extension, you should also assign your mailbox to a Virtual Mailbox Key at that
remote location extension (see "Virtual Mailbox Key — remote location" on page H.6 of this document).
H.8
User's Guide