ESI IVX X-Class User Manual page 13

Feature phone
Hide thumbs Also See for IVX X-Class:
Table of Contents

Advertisement

User's Guide
Second Expansion Console connection
Notes: If connecting only one Expansion Console to a 48-Key Feature Phone, see "60-Key Expansion
Console connection," page A.8.
The Second Expansion Console connects to the 60-Key Expansion Console and cannot connect
directly to the 48-Key Feature Phone (which is the only phone to which you can connect a 60-Key
Expansion Console).
1. The Second Expansion Console
(which is physically identical to a
60-Key Expansion Console)
includes an expansion "Y" cable
1
(right)
. Lay out the cable across the
back of the equipment so that the
AC adapter is on left and the end of
the cable is on the right.
2. Connect the right end of the
expansion "Y" cable to the
appropriate connector on the bottom
of the 48-Key Feature Phone (below).
3. Then, connect the expansion "Y" cable's middle plug to the 60-Key Expansion Console, the left
plug to the Second Expansion Console, and the AC adapter to an appropriate 110 VAC outlet to
provide power to the Second Expansion Console (above).
4. To keep cabling out of the way, thread the expansion "Y" cable into the slots on the bottom of the
phone and the two Expansion Consoles.
5. Program the keys on the two Expansion Consoles using the same procedure as with the 48-Key
Feature Phone (press PROGRAM 2).
6. If necessary, remove the clear plastic overlay from the keys on the two 60-Key Expansion Consoles.
7. For maximum convenience, label the paper overlay to show how the keys are programmed (your
Installer or System Administrator can do this with ESI software).
8. Install the labeled paper overlays on the two 60-Key Expansion Consoles.
9. Install the clear plastic overlays over the paper overlays, to protect them.
10. Use the provided Velcro
side of the 48-Key Feature Phone, and the right side of the 60-Key Expansion Console to the left
side of the Second Expansion Console).
1
This diagram shows the backs of the Expansion Consoles.
®
tape to attach the left side of the 60-Key Expansion Console to the right
To
headset
To 60-Key
Line cord
Console
to wall
Connectors on bottom of 48-Key Digital
Feature Phone; TAPI model shown
(TAPI)
to PC
Handset
Introduction
A.9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents