ESI IVX X-Class User Manual page 64

Special keys
Using Esi-Dex: An example
Let's say you're on a call with the XYZ Company — XYZ COMPANY appears on your display — and
you wish to save the name and number for future use. Just press ESI-DEX. Your display will confirm
that the information has been stored.
described below for each model of ESI Feature Phone.
. . . On the 24-Key Feature Phone
1. Press ESI-DEX until you see PERSONAL DEX on the display.
2. Enter 9 2 5 (W A L). The display will show the first stored name that starts with the character range
from WAJ to YCL.
3. Press the scroll keys (
4. Press ESI-DEX again. This dials the number for the XYZ Company.
Important: The number dialed (if stored from a Caller ID) will be the number for the actual line used by the
caller, and may be different than the caller's listed number. Additionally, some local calls may not
be auto-dialed correctly, depending on the limitations of your area's local dialing plan. You may
wish to create a manual listing for these. Consult your Administrator if you need more help.
. . . On the 48-Key Feature Phone
1. While your station is idle (or just after receiving dial tone), press ESI-DEX.
2. Press PER to select the Personal Dex.
(Continued)
1
If the number is already in your Personal Dex, the message ALREADY STORED will appear on the display. This indicates
Esi-Dex has prevented storing the same number multiple times.
F.8
1
Then, to call the XYZ Company in the future, use Esi-Dex as
and ) until XYZ COMPANY appears in the display.
User's Guide