ESI IVX X-Class User Manual page 59

User's Guide
Auto-dialing using Esi-Dex
. . . On the 24-Key Feature Phone
1. While your station is idle (or just after receiving dial tone), repeatedly press ESI-DEX to select the
desired Dex:
Notes: System Dex and Location Dex aren't available on every system.
For the remainder of this example, we'll assume you selected Personal Dex. However, the
procedure is the same for any of the other Dexes.
2. Choose the desired name from the selected Dex, using one of two methods.
Either:
(a.) Scroll — Press the scroll keys (
the name (names will appear in the order in which they were stored in the Dex).
. . . Or . . .
(b.) Dial-by-name — Dial up to the first three characters
mailbox name. For example: if you want to call John Doe, dial 5 6 4 (because it spells J O H).
You'll begin to see names that begin with those letters. You can then use the scroll keys (
and ) until you find the desired name and number.
3. Press ESI-DEX again to dial the number.
. . . On the 48-Key Feature Phone
1. While your station is idle (or just after receiving dial tone), press ESI-DEX. This causes the Esi-Dex
menu to appear, as shown:
2. Press a key to choose the appropriate Dex —Station Dex (STA), System Dex (SYS), Location Dex
(LOC) or Personal Dex (PER) — or press RELEASE to cancel the procedure.
Notes: System Dex and Location Dex aren't available on every system.
For the remainder of this example, we'll assume you selected Personal Dex. However, the
procedure is the same for any of the other Dexes.
The display now reads:
(Continued)
1
You can also dial just one or two characters, and then press # to enter.
and ) to look up and down through the Dex until you find
1
of the extension, department, or guest
Special keys
F.3