Team Losi Triple-XT Sport Owner's Manual page 27

Figure 53
!
Step 23. Pick up your truck, making sure that the dogbones
(59) stay in the outdrives (77).
!
Step 24. Attach the bottom of a rear shock (longer of the two
sizes of shocks) to the right rear suspension arm (50) by snapping
the shock bottom (120) onto the shock mount ball (122) that is
attached to the rear shock mount bracket (51) on the right rear
arm (50).
!
Step 25. Slide a short shock mount bushing (132), large side
first, over the screw (23) on the right side of the rear shock tower
(55).
!
Step 26. Place the top of the shock body (126) over the shock
mount bushing (132). Secure the shock to the tower (55) by thread-
ing a 4-40 locknut (110) onto the shock mount screw (23).
*NOTE: Before attaching the top of the shock, make sure that the
dogbone is in place in the outdrive.
!
Step 27. Repeat Steps 24 through 26 for the left rear shock.
Figure 54
57
!
Step 28. Insert the shock end (120) of a front shock into the
shock mounting area of the right front suspension arm (38) and
line up the hole in the shock mount ball (122) with the outside
hole in the arm (38).
!
Step 29. Secure the shock to the front arm (38) by threading
a 4-40 x 1/2" cap-head screw (57) all the way into the arm (38)
from the rear.
!
Step 30. Slide a long shock mount bushing (133), large side
first, over the screw (23) on the right side of the front shock tower
(24).
!
Step 31. Place the top of the shock body (125) over the shock
mount bushing (133) on the front shock tower (24). Secure the
shock to the tower (24) by threading a 4-40 locknut (110) onto
the shock mount screw (23).
!
Step 32. Repeat Steps 28-31 for the left front shock.
BAG E (Continued)
110
110
126
50
120
122
125
133
Figure 54
2 3
110
23
132
51
Figure 53
110
122
57