Save / Load Profile Commands - ATEN VM0404 User Manual

Save / Load Profile Commands

The formulas for Save/Load Profile commands are as follows:
1. Command + Profile + Number + Control + [Enter]
For example, to save the current connection configuration to profile 01, type
the following:
profile f 01 save [Enter]
2. Command + Profile + Number + Control + [Enter]
For example, to load profile 01, type the following:
profile f 01 load [Enter]
Possible Values
The following table shows the possible values for Save/load Profile
commands:
Command
profile
Profile
f
Profile Number
yy
Control
save
load
Profile Command Table:
Command Profile
profile f
profile f
Save / Load profile
Profile
00-07 (default is 00)
Save the current connection configuration
Load a saved profile
Num1 Control
yy save [Enter Key]
yy load [Enter Key]
Chapter 4. RS-232 Commands
Description
Description
Description
Description
Enter Description
Save current connection
configuration to profile yy
(Default: 00)
Load saved profile yy
(Default: 00)
(yy:00~07)
(yy:00~07)
17