Power On/Off Individual Output Displays; Power On/Off All Output Displays - ATEN VM0404 User Manual

4x4 video matrix switch with audio

Hide thumbs Also See for VM0404:

Table of Contents

Power on/off individual Output displays

To power on/off individual Output displays, use the remote control to do the

following:

1. Press the OUTPUT port number (1–4) you want to power on/off.

2. Press the ON or OFF pushbutton within 2 seconds.*

3. Repeat steps 1-2 to change the power status back on/off.

*For individual power on/off to occur properly the ON or OFF

pushbutton must be pressed within 2 seconds of pressing the OUTPUT

number. Failing to do so will result in all displays being powered on or

off respectively.

To power on/off all Output displays simultaneously*, use the remote control to

do the following:

1. Press the ON or OFF pushbutton.

2. Repeat step 1 to simultaneously change the power status of all Output

ports back on/off.

*Using the ON or OFF pushbutton brings all Output ports to the same

power status, regardless of current individual (on/off) power statuses.

Chapter 3. Operation

Table of Contents