HP 34970A User Manual page 182

Chapter 5 Remote Interface Reference
SCPI Command Summary
Scan Configuration Commands
(see page 226 for more information)
ROUTe
scan_list
:SCAN ( @ < >)
:SCAN?
:SCAN:SIZE?
TRIGger
IMMediate
:SOURce {BUS|
:SOURce?
TRIGger
:TIMer {< seconds >| MIN
:TIMer?
TRIGger
:COUNt {< count >| MIN |MAX|INFinity}
:COUNt?
ROUTe
seconds
:CHANnel:DELay <
:CHANnel:DELay? [( @
:CHANnel:DELay:AUTO {OFF|
:CHANnel:DELay:AUTO? [(
FORMat
OFF
:READing:ALARm {
:READing:ALARm?
:READing:CHANnel { OFF
:READing:CHANnel?
:READing:TIME { OFF
:READing:TIME?
OFF
:READing:UNIT {
:READing:UNIT?
FORMat
:READing:TIME:TYPE {ABSolute|
:READing:TIME:TYPE?
ABORt
INITiate
READ?
This command redefines the scan list when executed.
This command applies to all channels in the instrument (Global setting).
Default parameters are shown in bold.
184
|EXTernal|ALARm1|ALARm2|ALARm3|ALARm4|TIMer}
|MAX}
@ ch_ list
>[,( < >)]
ch_list
< >)]
ON }[,( @ < ch_list >)]
@ < ch_list >)]
|ON}
|ON}
|ON}
|ON}
RELative
}