Multiple Vlans With Tagging - HP 445946-001 Application Manual

Multiple VLANS with tagging

The following figure shows only those switch-port-to-server links that must be configured for the example.
While not shown, all other server links remain set at their default settings.
Figure 8 Multiple VLANs with VLAN tagging
The features of this VLAN are described in the following table:
Table 10 Multiple VLANs with tagging
Component
Switch 1
Switch 2
Description
Switch 1 is configured for VLANS 1, 2, and 3. Port 1 is tagged to accept traffic
from VLANs 1 and 2. Port 18 is tagged to accept traffic from VLANs 1, 2, and 3.
Port 20 is an untagged member of VLAN 2.
VLANs 1 and 3.
Switch 2 is configured for VLANS 1, 3, and 4. Port 2 is tagged to accept traffic from VLANS
3 and 4. Port 4 is configured only for VLAN 3, so VLAN tagging is off. Port 18 is tagged to
accept traffic from VLANs 1 and 3. Port 20 is an untagged member of VLAN 4. Port 21 is
tagged, and accepts traffic from VLANs 1 and 3.
Port 21 is tagged, and accepts traffic from
VLANs
60