HP 445946-001 Application Manual page 179

2. Configure client and server interfaces.
/cfg/l3/if 1
>> IP Interface 1# addr 192.168.1.100
>> IP Interface 1# vlan 10
>> IP Interface 1# ena
>> IP Interface 1# ..
>> Layer 3# if 2
>> IP Interface 2# addr 192.168.2.101
>> IP Interface 1# vlan 20
>> IP Interface 2# ena
>> IP Interface 2# ..
>> Layer 3# if 3
>> IP Interface 3# addr 10.0.1.100
>> IP Interface 3# mask 255.255.255.0
>> IP Interface 3# ena
>> IP Interface 2# ..
>> Layer 3# if 4
>> IP Interface 4# addr 10.0.2.101
>> IP Interface 4# mask 255.255.255.0
>> IP Interface 4# ena
3.
Configure the default gateways. Each default gateway points to one of the Layer 2 routers.
/cfg/l3/gw 1
>> Default gateway 1# addr 192.168.1.1
>> Default gateway 1# ena
>> Default gateway 1# ..
>> Layer 3# gw 2
>> Default gateway 1# addr 192.168.2.1
>> Default gateway 1# ena
4.
Turn on VRRP and configure two Virtual Interface Routers.
/cfg/l3/vrrp/on
>> Virtual Router Redundancy Protocol# vr 1
>> VRRP Virtual Router 1# vrid 1
>> VRRP Virtual Router 1# if 1
>> VRRP Virtual Router 1# addr 192.168.1.200
>> VRRP Virtual Router 1# ena
>> VRRP Virtual Router 1# ..
>> Virtual Router Redundancy Protocol# vr 2
>> VRRP Virtual Router 2# vrid 2
>> VRRP Virtual Router 2# if 2
>> VRRP Virtual Router 2# addr 192.168.2.200
>> VRRP Virtual Router 2# ena
5.
Enable tracking on ports. Set the priority of Virtual Router 1 to 101, so that it becomes the Master.
/cfg/l3/vrrp/vr 1
>> VRRP Virtual Router 1# track/ports/ena
>> VRRP Virtual Router 1 Priority Tracking# ..
>> VRRP Virtual Router 1# prio 101
>> VRRP Virtual Router 1# ..
>> Virtual Router Redundancy Protocol# vr 2
>> VRRP Virtual Router 1# track/ports/ena
6. Turn off Spanning Tree Protocol globally.
/cfg/l2/stg 1/off
>> Spanning Tree Group 1# apply
>> Spanning Tree Group 1# save
(Select interface 1)
(Define IP address for interface 1)
(Assign VLAN 10 to interface 1)
(Enable interface 1)
(Select interface 2)
(Define IP address for interface 2)
(Assign VLAN 20 to interface 2)
(Enable interface 2)
(Select interface 3)
(Define IP address for interface 3)
(Define subnet mask for interface 3)
(Enable interface 3)
(Select interface 4)
(Define IP address for interface 4)
(Define subnet mask for interface 4)
(Enable interface 4)
(Select default gateway 1)
(Point gateway to the first L2 router)
(Enable the default gateway)
(Select default gateway 2)
(Point gateway to the second router)
(Enable the default gateway)
(Turn VRRP on)
High availability
(Select virtual router 1)
(Set VRID to 1)
(Set interface 1)
(Define IP address)
(Enable virtual router 1)
(Enable virtual router 1)
(Select virtual router 2)
(Set VRID to 2)
(Set interface 2)
(Define IP address)
(Enable virtual router 2)
(Select VRRP virtual router 1)
(Set tracking on ports)
(Set the VRRP priority)
(Select VRRP virtual router 2)
(Set tracking on ports)
(Turn off STG)
179