Configuring Switch 1 (Bbi Example) - HP 445946-001 Application Manual

Configuring Switch 1 (BBI example)

1.
Configure port and VLAN membership on Switch 1 as described in the "Configuring ports and
VLANs on Switch 1 (BBI example)" section, in the "VLANs" chapter of this guide.
2.
Add VLAN 2 to Spanning Tree Group 2.
Click the Configure context button on the Toolbar.
a.
Select Spanning Tree Groups (click the underlined text, not the folder).
b.
Select a Spanning Tree Group number.
c.
Spanning Tree Protocol
74