5.
Enable tracking on ports. Set the priority of Virtual Router 2 to 101, so that it becomes the Master.
/cfg/l3/vrrp/vr 1
>> VRRP Virtual Router 1# track/ports/ena
>> VRRP Virtual Router 1 Priority Tracking# ..
>> VRRP Virtual Router 1# ..
>> Virtual Router Redundancy Protocol# vr 2 (Select VRRP virtual router 2)
>> VRRP Virtual Router 2# track/ports/ena
>> VRRP Virtual Router 2 Priority Tracking# ..
>> VRRP Virtual Router 2# prio 101
6.
Turn off Spanning Tree Protocol globally. Apply and save changes.
/cfg/l2/stg 1/off
>> Spanning Tree Group 1# apply
>> Spanning Tree Group 1# save
Task 1: Configure Switch A (BBI example)
1.
Configure ports and VLANs.
Click the Configure context button.
a.
Open the Virtual LANs folder, and select Add VLAN.
b.
(Select VRRP virtual router 1)
(Set tracking on ports)
(Set tracking on ports)
(Set the VRRP priority)
(Turn off STG)
High availability
181