Configuring Radius On The Switch (Bbi Example) - HP 445946-001 Application Manual

Configuring RADIUS on the switch (BBI example)

1.
Configure RADIUS parameters.
Click the Configure context button.
a.
Open the System folder, and select Radius.
b.
Enter the IP address of the primary and secondary RADIUS servers, and enter the RADIUS secret
c.
for each server. Enable the RADIUS server.
CAUTION: If you configure the RADIUS secret using any method other than a direct console
connection, the secret may be transmitted over the network as clear text.
Click Submit.
d.
Accessing the switch
23