GE Profile J2S968 SERIES Technical Service Manual page 10

Special Oven Control Features
+
+
+
OR
(depending on model)
Tone Volume
This feature allows you to adjust the tone
volumes to a more acceptable volume. There are
three possible volume levels.
Touch the BROIL HI/LO and BAKE
pads at the same time for 3 seconds,
until the display shows SF.
Touch the OVEN LIGHT ON/OFF pad.
The display will show 2 BEEP. This is
the high volume level.
Touch the OVEN LIGHT ON/OFF pad
again. The display will show 3 BEEP.
This is the loudest volume level.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Touch the BROIL HI/LO and BAKE
pads at the same time for 3 seconds
until the display shows SF.
Touch the CLOCK pad once. The
display will show 12 hr. If this is
the choice you want, touch the
START pad.
Using Auto Recipe Conversion
™
When using convection bake, the Auto Recipe
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
The display will show the actual converted
(reduced) temperature. For example, if you enter a
regular recipe temperature of 350°F and touch the
START pad, the display will show CON
and the converted temperature of 325°F.
NOTE: This feature only converts cooking
temperatures, not cooking times.
– 10 –
Touch the OVEN LIGHT ON/OFF pad
again. The display will show 1 BEEP.
This is the quietest volume level.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Choose the desired sound level
(1 BEEP, 2 BEEP, 3 BEEP).
Touch the START pad to activate the
level shown.
Touch the CLOCK pad again to change
to the 24 hour military time clock. The
display will show 24 hr. If this is the choice
you want, touch the START pad.
Touch the CLOCK pad again to black out
the clock display. The display will show
OFF. If this is the choice you want, touch
the START pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.
™ To turn off this feature:
Touch the BROIL HI/LO and BAKE
pads at the same time for 3 seconds
until the display shows SF.
Touch the CONVECTION BAKE or
CONVECTION BAKE MULTI/1 RACK
pad (depending on model). The
display will show CON ON. Touch the
CONVECTION BAKE or CONVECTION
BAKE MULTI/1 RACK pad again. The
display will show CON OFF.
Touch the START pad.
To turn on this feature, repeat steps 1–3
above but touch the START pad when
CON ON is in the display.