Configuration Information - Factory Integrated Models - HP ProLiant DL180 G Quickspecs

QuickSpecs

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
Processors
Memory
Hot Plug Models
HP ProLiant DL180 G5 Hot Plug SAS/SATA Rack CTO Chassis
Factory Integrated Model ships with:
One embedded NC105i PCI-E Gigabit Server Adapters (WOL & PXE-capable)
Three available PCI-Express slots:
Slot 1: x8 low-profile/half-height slot
Slot 2 & 3: x4 Full-Height/Full Length
NOTE: Optional PCI-X option kit includes: Slot 1 and 2: full-length/full-height
PCI-X 100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is
installed in the server.
One HP SATA Embedded Cable Kit
750 Watt Power Supply
One Highline IEC Power Cord
4 Non-Hot Plug Fans
Rack (2U), (3.5 in/8.89 cm)
Quad-Core Intel® Xeon® processor E5440 (2.83 GHz, 80 W, 1333 MHz FSB)
Kit, FIO
NOTE: If 2 processors are desired, select one 466106-L21 and one 466106-
B21.
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80 W, 1333 MHz FSB)
Kit, FIO
NOTE: If 2 processors are desired, select one 458784-L21 and one 458784-
B21.
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz, 80 W, 1333 MHz FSB)
Kit, FIO
NOTE: If 2 processors are desired, select one 458785-L21 and one 458785-
B21.
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80 W, 1333 MHz FSB)
Kit, FIO
NOTE: If 2 processors are desired, select one 458786-L21 and one 458786-
B21.
Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 65W, 1066MHz FSB) Kit,
FIO
NOTE: If 2 processors are desired, select one 458787-L21 and one 458787-
B21.
1 GB PC2-5300 2 x 512 MB Single Rank Kit
1GB REG PC2-5300 1 x 1GB Kit
DA - 12903 Worldwide QuickSpecs — Version 8 — 5.16.2008
HP ProLiant DL180 G5
457649-B21
466106-L21
458784-L21
458785-L21
458786-L21
458787-L21
408850-B21
462483-B21
Page 11