HP ProLiant DL180 G Quickspecs page 5

QuickSpecs
Standard Features
Interfaces
Graphics
Form Factor
Remote Management Lights-Out 100c
Parallel
Network RJ-45
(Ethernet)
Serial
Pointing Device (Mouse) 1
Graphics
Keyboard
USB
32MB shared supporting 1600 x 1200 x 16M resolution.
Rack (2U), (3.5 in/8.89 cm)
DA - 12903 Worldwide QuickSpecs — Version 8 — 5.16.2008
None
1 10/100/1000 NIC port (plus 1 optional for the HP ProLiant Lights Out
100c Remote Management Card)
1
1
1
7 total ports: (2) front, (4) rear, (1) internal
NOTE: Please see the following URL for additional information
regarding USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-
support.html.
Lights Out LO100c is a Remote Management Card (RMC) for HP
ProLiant 100 series servers that do not have embedded LO100i. The
LO100c has all the features of the LO100i Advanced license and allows
customers, or their service providers, to remotely manage ProLiant
servers over a LAN or the Internet from anywhere, anytime regardless
whether the server is located in the same building, across town, or
around the globe.
With LO100c, users can acquire complete remote control with Virtual
KVM (graphical hardware-based, remote console). Users can also
access the server's serial console, control system power, update system
firmware and software, as well as monitor system environmental
conditions. The LO100c remote management card can be accessed
from a web browser or command line interface. This virtual "at-the-
server" functionality means administrators stay in control of remote HP
ProLiant 100 series servers.
The HP Lights-Out100c consists of a management processor and
firmware that provides cost-effective, entry-level lights-out functionality,
basic system board management functions, and diagnostics.
NOTE: For more information, please refer to the QuickSpecs for the
LO100c found at::
http://h18004.www1.hp.com/products/servers/management/
remotemgmt/lightsout100/index.html
HP ProLiant DL180 G5
Page 5