HP ProLiant DL180 G Quickspecs page 12

QuickSpecs
Configuration Information - Factory Integrated Models
Hard Drive Cage
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below. Some options may not be available for factory
integration. Please contact an HP sales representative for additional information.
2 GB REG PC2-5300 2 x 1 GB Low Power Single Rank Kit
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
4 GB REG PC2-5300 2 x 2 GB Single Rank Kit
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit
HP DL180 8HDD Cage FIO Kit
HP DL180 12HDD Cage FIO Kit
NOTE: The installation of a 12HDD Cage requires the addition of a 4-port SAS
controller that supports expanders. A Smart Array Controller, P400 or better, is
recommended.
NOTE: The addition of a Smart Array Controller (or 4-port SAS controller that
supports expanders) requires the addition a SAS/SATA Multi-lane cable
(464830-B21).
DA - 12903 Worldwide QuickSpecs — Version 8 — 5.16.2008
HP ProLiant DL180 G5
483399-B21
408851-B21
461840-B21
408853-B21
408854-B21
451368-B21
451369-B21
Page 12