Computer Room Layout Plan - HP A9834-9001B User's & Service Manual

Templates
Templates
NOTE Photocopying typically changes the scale of copied drawings. If any templates are copied, then
all templates and floor plan grids must also be copied.

Computer Room Layout Plan

Use the following procedure to create a computer room layout plan:
Step 1. Remove several copies of the floor plan grid.
Step 2. Cut and join them together (as necessary) to create a scale model floor plan of the computer room.
Step 3. Remove a copy of each applicable equipment footprint template.
Step 4. Cut out each template selected in step 3; then place it on the floor plan grid created in step 2.
Step 5. Position pieces until the desired layout is obtained; then fasten the pieces to the grid. Mark
locations of computer room doors, air-conditioning floor vents, utility outlets, and so on.
232
Appendix D