Mp Command: Dl - HP A9834-9001B User's & Service Manual

Management Processor Commands

MP Command: DL

MP Command: DL
DL - Disable LAN Access
• Access level—Administrator
• Scope—Complex
This command disables Telnet LAN access. Disabling Telnet access kills all of the current Telnet connections
and causes future telnet connection requests to be given a connection refused message.
Example B-9 DL Command
Example:
In this example, the administrator is connected via telnet to the MP. When DL executes, his/her telnet
connection to the MP is closed.
MP:CM> dl
Disable telnet access and close open telnet connections? (Y/[N]) y
WARNING: Answering yes will close this connection.
Are you sure? (Y/[N]) y
-> Telnet access disabled. All non-diagnostic connections closed.
Connection closed by foreign host.
• See also: DI, EL
Note that this command is deprecated. It does not appear in the help menu.
Use the SA and DI commands to control both telnet and SSH connections.
184
Appendix B