A Templates; Equipment Footprint Templates; Computer Room Layout Plan; Server Space Requirements - HP Integrity rx8640 Manual

Site preparation guide, fourth edition - hp integrity rx8640, hp 9000 rp8440 servers

Hide thumbs Also See for Integrity rx8640:

Table of Contents

A Templates

This appendix contains blank floor plan grids and equipment templates. Combine the necessary

number of floor plan grid sheets to create a scaled version of the computer room floor plan.

Figure A-1

illustrates the overall dimensions required for the servers.

Figure A-1 Server Space Requirements

Equipment footprint templates are drawn to the same scale as the floor plan grid (1/4 inch = 1

foot). These templates show basic equipment dimensions and space requirements for servicing.

Refer to

Figure A-2 (page

The service areas shown on the template drawings are lightly shaded.

Use the equipment templates with the floor plan grid to define the location of the equipment

that will be installed in your computer room.

NOTE:

Photocopying typically changes the scale of drawings copied. If you copy any templates,

then you must also copy all templates and floor plan grids.

Use the following procedure to create a computer room layout plan:

Remove several copies of the floor plan grid

42).

(Figure

A-3).

Equipment Footprint Templates

Table of Contents

Rp8440 9000 rp8440