Figure C-16 Power Status First Window; Figure C-17 Power Status Window - HP A9834-9001B User's & Service Manual

Powering the System On and Off
Powering On the System Using the pe Command
Step 4. From the CM> prompt, enter ps to observe the power status. The status screen shown in
Figure C-16 appears.

Figure C-16 Power Status First Window

Step 5. At the Select Device prompt, enter B then the cabinet number to check the power status of the
cabinet. Observe that the Power switch is on and Power is enabled as shown in Figure C-17.

Figure C-17 Power Status Window

226
Appendix C