Step 8. From the VFP, enter s to select the whole system or enter the partition number to select a
particular partition. You should see an output similar to that shown in Figure C-6.
Figure C-6 Example of Partition State
Step 9. Enter
ctrl+B
Shutting Down the Operating System
You must shutdown the operating system on each partition. From the Main Menu prompt, enter co to bring
up the Partition Consoles Menu (Figure C-7).
Figure C-7
Partition Consoles Menu
For each partition, perform the following steps:
Step 1. Enter the partition number at the prompt.
Step 2. Log in to the console:
•
HP-UX: Log in as root
•
Linux: Log in as root
Appendix C
to exit the Virtual Front Panel and bring up the Main Menu.
Powering the System On and Off
Shutting Down the System
217