Figure 3-4 Cutting Polystrap Bands - HP A9834-9001B User's & Service Manual

Installing the System
Unpacking and Inspecting the System

Figure 3-4 Cutting Polystrap Bands

Step 3. Lift the cardboard corrugated top cap off of the shipping box.
Step 4. Remove the corrugated sleeves surrounding the cabinet.
CAUTION
Step 5. Remove the stretch wrap, the front and rear top foam inserts, and the four corner inserts from the
cabinet.
Step 6. Remove the ramps from the pallet and set them aside (Figure 3-5 on page 83).
82
Cut the plastic wrapping material off rather than pull it off. Pulling the plastic
covering off represents an electrostatic discharge (ESD) hazard to the hardware.
Hold here
Cut here
Polystrap bands
Chapter 3