Figure 3-3 Front Of Cabinet Container - HP A9834-9001B User's & Service Manual

Unpacking the Cabinet
WARNING Use three people to unpack the cabinet safely.
HP recommends removing the cardboard shipping container before moving the cabinet into the computer
room.
If unpacking the cabinet in the computer room, be sure to position it so that it can be moved
NOTE
into its final position easily. Notice that the front of the cabinet (Figure 3-3) is the side with the
label showing how to align the ramps.
To unpack the cabinet, perform the following steps:
Step 1. Position the packaged cabinet so that a clear area about three times the length of the package
(about 12 feet or 3.66 m) is available in front of the unit, and at least 2 feet (0.61 m) are available
on the sides.

Figure 3-3 Front of Cabinet Container

WARNING
Step 2. Cut the plastic polystrap bands around the shipping container (Figure 3-4 on page 82).
Chapter 3
Do not stand directly in front of the strapping while cutting it. Hold the
band above the intended cut and wear protective glasses. These bands are
under tension. When cut, they spring back and could cause serious eye
injury.
Unpacking and Inspecting the System
Label
Installing the System
81