Automatic Dispenser - Kenwood BM900 series Instructions Manual

Hide thumbs Also See for BM900 series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
using your Bread Maker
(refer to illustration panel)
1
Lift out the bread pan by the handle.
2
Fit the kneaders.
3
Pour the water into the bread pan.
4
Add the rest of the ingredients to the pan in the order
listed in the recipes.
Ensure that all the ingredients are weighed accurately
7
as incorrect measures will produce poor results.
8
Insert the bread pan into the oven chamber and push
down to ensure it is locked in position.
9
Lower the handle and close the lid.
10 Plug in and switch on - the unit will beep and default
to setting 1 (3:25).
11 Press the MENU button
is selected. The breadmaker will default to 1.5Kg &
medium crust colour.
12 Select the loaf size by pressing the LOAF SIZE
button
until the indicator moves to the required
loaf size.
13 Select the crust colour by pressing the CRUST button
until the indicator moves to the required crust
colour (light, medium, dark or rapid). Note: To select
the rapid version of the (1) Basic, (2) French or
(3) Wholewheat program press the CRUST colour
button
until the indicator points to .
14 Press the START/STOP button
the program press the START/STOP button
2 -3 seconds until it beeps.
15 At the end of the baking cycle unplug the breadmaker.
16 Lift out the bread pan by the handle. Always use
oven gloves as the pan will be hot.
17 Then turn out onto a wire rack to cool.
18 Leave the bread to cool for at least 30 minutes before
slicing, to allow the steam to escape. The bread will
be difficult to slice if hot.
19 Clean the bread pan and kneader immediately after
use (see care and cleaning).
until the required program
. To stop or cancel
for

automatic dispenser

Your BM900 breadmaker is fitted with an automatic
dispenser for releasing additional ingredients directly
into the dough during the kneading cycle. This ensures
that the ingredients are not overprocessed or crushed
and are evenly distributed.
to fit and use the automatic dispenser
1 Fit the dispenser
is secure.
The breadmaker can be used without the dispenser
fitted, just lift the dispenser out and fit the cover
instead. The manual alert will still sound. Do not
operate the breadmaker without either the
dispenser
or dispenser cover
2 Fill the dispenser with the required ingredients.
3 The Automatic dispenser operates after approx. 15-20
minutes of kneading and an audible alert sounds as
well in case you need to add ingredients manually.
hints & tips
Not all ingredients are suitable for use with the
automatic dispenser and for best results follow the
guidelines below: -
Do not overfill the dispenser – follow the recommended
quantities specified in the recipes supplied.
Keep the dispenser clean and dry to prevent
ingredients sticking.
Cut ingredients roughly or lightly dust with flour to
reduce stickiness, which may prevent the ingredients
from being released.
4
to the lid. Push down to ensure it
fitted.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents