Turning On And Off; To Connect Power - HP xp8010 series Reference Manual

Turning On and Off

This section provides the following instructions:
■
"To connect power" on page 23
■
"To turn the projector on" on page 24
■
"To turn the projector off" on page 25
■
"To operate the remote control" on page 25
■
"To reset the projector" on page 26

To connect power

1. Connect one end of the power cord to the back of the projector
end to an electrical outlet
2. Turn on the main disconnect switch
✎
To maintain network connectivity, the main disconnect switch must remain in the on
position.
Reference Guide
2
.
3
on the back of the projector.
Installation and Setup
1
and the other
23