Maintenance
Quick Choice menu
This menu provides quick access to commonly used functions from other menus. The
menu in your projector may differ from the menu shown below.
quick choice
Brightness
Contrast
Keystone correction
Reset keystone correction
Hide
Input menu
This menu was named the Connect menu in earlier firmware versions. For a visual
aid, see "Back panel" on page 12.
input
VGA #1
VGA #2
Composite video
62
Brightens or darkens the image.
Sets the difference between light and dark areas.
Corrects the slanted edges of an image. This
function compensates for an off-center projector
location.
Resets the keystone correction to zero.
Removes all images from the screen.
Shows the input to the VGA #1 port. The VGA #1
usually connects the projector to a computer. This
port usually connects to a computer. This input is
normally considered a graphics input.
Shows the input to the VGA #2 port. The VGA #2
usually connects the projector to a computer. This
port usually connects to a computer. This input is
normally considered a graphics input.
Shows the input to the yellow composite port (the
input to the left of the S-video port on the back
panel). The port usually connects to TV or VCR. This
input is normally considered a video input.
Reference Guide