HP sb21 Owner's Manual

Hewlett packard projectors owner's manual.
Hide thumbs

Advertisement

owner's manual
hp digital projectors
xb31 & sb21
English • version 13.05.02

Advertisement

   Related Manuals for HP sb21

   Summary of Contents for HP sb21

  • Page 1

    & sb21 English • version 13.05.02...

  • Page 2

    sb21...

  • Page 3: Table Of Contents

    ... 11 Connecting the hp digital projector sb21 to a computer... 12 Connecting the hp digital projector sb21 to other signal sources ... 13 operation Turning the projector ON and OFF... 14 Turning the projector ON... 14 Turning the projector OFF ...

  • Page 4: Personal Safety, Protecting Your Projector

    • Use camera-lens cleaning materials and procedures to clean the lens. • Disconnect the power plug from AC outlet if the projector isn’t being used for an extended period of time. • Allow the projector to cool-down for at least 30 minutes before changing the lamp.

  • Page 5: Projector Features

    • User-friendly control panel • Built-in 2 watt audio speaker • Carrying case and cables included (refer to page 6) The hp digital projector sb21 is an SVGA single chip 0.55” DLP these outstanding features: • True SVGA, 800 x 600 addressable pixels •...

  • Page 6: Package Contents

    Package Contents The hp digital projectors come with the following items. Please check to make sure your unit is complete. If anything is missing contact your dealer immediately. xb31 Projector with lens cap Projector with lens cap Composite Video Cable 2.5 mm Mini Phone Jack for...

  • Page 7: Projector Overview

    3. I/O Connection Ports 4. Focus Ring 6. Remote Control Receivers (front & back) 7. Elevation Button 8. Elevation Foot 9. Lens Cap 5. Remote Control Receivers (front & back) 6. Elevation Button 7. Elevation Foot 8. Lens Cap introduction xb31 sb21...

  • Page 8: Control Panel, Back Panel Features

    5. VESA M1-DA Analog RGB / Digital / HDTV / Component Video / USB Mouse Input 4. Power Connector 5. VESA M1-DA Analog RGB / Digital / HDTV / Component Video / USB Mouse Input introduction xb31 sb21 xb31 sb21...

  • Page 9: Laser Pointer

    Right Mouse Button Hide Image Page Down Keystone Correction Zoom In / Zoom Out Menu Left Mouse Button introduction xb31 sb21 CAUTION! PREVENT EYE INJURY. Do not point the remote control’s laserlight at anyone’s eyes. NOTE: Connect the USB cable when using the remote control mouse features.

  • Page 10: Connecting The Hp Digital Projector Xb31 To A Computer

    Connecting the hp digital projector xb31 to a computer Connect the power cord to the projector and a power outlet. Start the projector; after a 30- second warm-up it will search for a video signal. Connect the black end of the video cable to the projector.

  • Page 11: Connecting The Hp Digital Projector Xb31 To Other Signal Sources

    Connecting the hp digital projector xb31 to other signal sources Antenna Digital Tuner Output Video Output 1. Power Cord 2. Composite Video Cable 3. Audio Cable 4. S-video Cable 5. M1-A to HDTV / Component and USB Cable (optional accessory)

  • Page 12: Connecting The Hp Digital Projector Sb21 To A Computer

    Connecting the hp digital projector sb21 to a computer Connect the power cord to the projector and a power outlet. Start the projector; after a 30- second warm-up it will search for a video signal. Connect the black end of the video cable to the projector.

  • Page 13: Connecting The Hp Digital Projector Sb21 To Other Signal Sources

    Connecting the hp digital projector sb21 to other signal sources S-video Output Antenna Digital Tuner Output 1. Power Cord 2. Composite Video Cable 3. S-video Cable 4. M1-A to HDTV / Component and USB Cable (optional accessory) Video Output installation...

  • Page 14: Turning The Projector On And Off, Turning The Projector On, Turning The Projector Off

    • The cooling fan turns on. • The hp start-up screen will be displayed for 30 seconds and the blue Power Indicator Light will light up. 4. Turn on your signal source. The projector will detect your source automatically.

  • Page 15

    NOTE: When the blue Power Indicator Light is blinking the unit cannot be turned ON or OFF. The projector will not respond to any user input. NOTE: The model shown is the hp xb31. operation xb31 sb21...

  • Page 16: Adjusting The Projected Image, Adjusting The Display Angle

    To lower the projector display angle: 1. Press and hold the elevation button 2. Lower the projector, then release the button to lock the elevation foot into its retracted position. Leveling the Projector Use the rear elevation foot adjustment screen.

  • Page 17

    Adjusting the display angle (continued) xb31 Elevation Button Elevation Foot sb21 Elevation Button Elevation Foot...

  • Page 18: Adjusting The Hp Xb31 Zoom And Focus

    Zoom is adjusted by rotating the zoom ring. Rotate the focus ring until the image is clear. The projector will focus at distances from 1.14 m to 12 m (3.7 feet to 39.4 feet). Zoom Ring Projected image size (diagonal) Screen Max.

  • Page 19: Adjusting The Hp Sb21 Focus, Projected Image Size (diagonal)

    Adjusting the hp sb21 focus Rotate the focus ring until the image is clear. The projector will focus at distances from 1.0 m to 12 m (3.3 feet to 39.4 feet). Projected image size (diagonal) Screen 25” 98” (Diagonal) Screen 20.0”x15.0”...

  • Page 20: Control Panel & Remote Control, Control Panel

    NOTE: This button will not function when the OSD menu is displayed. Auto Image Button • Press the “Auto Image” button to automatically synchronize the projector to the input source. NOTE: This button will not function when the OSD menu is displayed.

  • Page 21: On-screen Display Menus, How To Operate

    On Screen Display Menus The projector has multilingual On Screen Display (OSD) menus that allow you to make image adjustments by changing a variety of settings. How to operate • Press the “Menu” button on the Remote Control or Control Panel to open the OSD.

  • Page 22: Language" Menu

    “Language” menu tab. 3. Press the buttons to select the desired language. 4. Press the “Menu” button to finalize the selection. user controls xb31 sb21 NOTE: The hp sb21’s OSD does not include an Audio menu.

  • Page 23: All Images" Menu

    Aspect ratio type can be adjusted to 4:3 or 16:9. Reset this menu Choose “Yes” to return the display parameters on this menu to their factory default settings. user controls sb21 xb31 NOTE: The hp sb21’s OSD does not include an Audio menu.

  • Page 24: Audio" Menu

    • Choose the right icon to activate the projector’s speaker. Reset this menu Choose “Yes” to return the audio parameters of this menu to their factory default settings. user controls xb31 NOTE: The hp sb21’s OSD does not include an Audio menu.

  • Page 25: Computer Image" Menu

    NOTE: This message is displayed when an image source other than computer VGA is selected via the Source button or the auto detection function. The “Computer Image” parameters cannot be adjusted when this message is displayed. NOTE: The hp sb21’s OSD does not include an Audio menu.

  • Page 26: Management" Menu

    Machine Reset Choose “Yes” to return the display parameters (except for Lamp Hours) on ALL menus to their factory default settings. user controls xb31 sb21 NOTE: The hp sb21’s OSD does not include an Audio menu.

  • Page 27: Video Image" Menu

    Source button or the auto detection function (i.e. computer VGA or 480p). The “Video Image” parameters cannot be adjusted when this message is displayed. NOTE: The hp sb21’s OSD sb21 xb31 sb21 does not include an Audio menu.

  • Page 28: Remote Control

    Composite, Component and HDTV sources. Freeze Button • Press the “Freeze” button to freeze the screen image. Volume Up (+) and Volume Down (-) Buttons (hp xb31 only) • Press the “Volume +” or “Volume -” buttons to increase or decrease speaker volume.

  • Page 29

    Hide Image Page Down Keystone Correction Zoom In / Zoom Out Menu Left Mouse Button user controls xb31 sb21 CAUTION! PREVENT EYE INJURY. Do not point the remote control’s laserlight at anyone’s eyes. NOTE: Connect the USB cable when using the remote control mouse features.

  • Page 30: Troubleshooting

    If the resolution of your computer is higher than 1024×768 for the hp xb31 or 800×600 for the hp sb21, the projector will re-size the image to match the output of the computer. If desired, you may reset your computer’s display resolution to match these by following the steps provided in your computer’s owner’s manual.

  • Page 31

    • When the lamp module burns out it may make a loud popping sound. The projector will not turn back on until the lamp module has been replaced. Follow the lamp change procedure presented in this manual (page 30) and included with the replacement lamp.

  • Page 32: Changing The Lamp Module

    3. Remove the cover. 4. xb31: Remove the two screws from the lamp module. sb21: Remove the three screws from the lamp module. 5. Use the lamp module’s hinged handle to remove the lamp module. Reverse these steps to install the replacement lamp module.

  • Page 33

    Changing the lamp module (continued) NOTE: For both the xb31 and the sb21 digital projectors, a Phillips-head screwdriver is required for this procedure. xb31 sb21...

  • Page 34: Hp Xb31 Specifications

    Light Engine • Single Chip DLP Brightness • 1500 comparable lumens Contrast Ratio • 1800:1 (Full On/Full Off) Lamp • 156 watt (W) user-replaceable P-VIP Lamp Module Number of Pixels • 1024 (H)×768 (V) Displayable Colors • 16.7 million Projection Lens •...

  • Page 35: Hp Xb31 Compatibility Modes

    Mode Resolution V.Frequency (Hz) VESA VGA 640 x 350 VESA VGA 640 x 350 VESA VGA 640 x 400 VESA VGA 640 x 480 VESA VGA 640 x 480 VESA VGA 640 x 480 VESA VGA...

  • Page 36: Hp Sb21 Specifications

    Light Engine • Single Chip DLP Brightness • 1000 comparable lumens Contrast Ratio • 1800:1 (Full On / Full Off) Lamp • 132 watt (W) user-replaceable P-VIP Lamp Module Number of Pixels • 800 (H)×600 (V) Displayable Colors •...

  • Page 37: Hp Sb21 Compatibility Modes

    Mode Resolution V.Frequency (Hz) VESA VGA 640 x 350 VESA VGA 640 x 350 VESA VGA 640 x 400 VESA VGA 640 x 480 VESA VGA 640 x 480 VESA VGA 640 x 480 VESA VGA...

  • Page 38: Regulatory Information

    U.S.A. This digital projector has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 39: Declaration Of Conformity

    USA Contact: Hewlett Packard Co., Corporate Product Regulations Manager, 3000 Hanover Street, Palo Alto, CA 94304. Phone: (650) 857-1501. Hewlett Packard Company Hewlett Packard Company 1000 NE Circle Boulevard Corvallis, OR 97330-4239 Digital Projector xb31, sb21 regulatory information xb31 sb21 xb31 sb21...

  • Page 40

    • Ensure proper use by reading and following the instructions carefully. • If the unit requires service, contact an authorized hp service center – See page 37 for details. • Do not attempt to make any adjustment to the unit.

  • Page 41: Warranty & Support

    Refer to warranty/support information data sheet enclosed with the projector or contact hp post-sales support at www.hp.com/support/digitalprojectors or call (in the US) 208-323-2551 or (in Canada) 905-206-4663. hp offers telephone support world-wide. For the phone number of the customer care center nearest you, please visit the following URL: http://productfinder.support.hp.com/tps/CLC?h_product=top&h_lang=en&h_r...

This manual also for:

Xb31, L1511a

Comments to this Manuals

Symbols: 0
Latest comments: