HP xp8010 series Reference Manual: Picture Problems

Hewlett-packard projector reference guide.
Hide thumbs

Advertisement

Picture problems

If the image is not displayed on the screen, but the HP startup screen is
displayed:
If the wrong input source is displayed:
If the image is out of focus:
Reference Guide
Press the source button on the projector or remote control.
Turn off or disable the notebook or desktop computer screen
saver function.
For a computer connection, ensure your notebook computer's
external video port is turned on. See the video port card shipped
with the projector. On some notebooks, for example, press the
Fn + F4 function keys to turn on the external video port.
Verify that the right input source is connected. Open the
on-screen menu and select input. Then set the correct input
source where the equipment is connected.
Verify that the input port is enabled for auto-searching. Open the
on-screen menu and select setup > Enable sources.
Verify that auto search is enabled. Open the on-screen menu and
select input > Source auto-search.
Press the source button on the projector or the remote control to
select another active input source.
Verify that the right input source is connected. Open the
on-screen menu and select input. Then set the correct input
source.
Verify that the input port is enabled for auto-searching. Open the
on-screen menu and select setup > Enable sources.
Verify that auto search is enabled. Open the on-screen menu and
select input > Source auto-search.
Ensure the lens cap is removed.
While displaying the on-screen menu, adjust the focus ring. (The
image size should not change; if it does, you are adjusting the
zoom not the focus.)
Troubleshooting
73

Advertisement

   Related Manuals for HP xp8010 series

This manual also for:

Xp8020, Xp8000 - digital projector

Comments to this Manuals

Symbols: 0
Latest comments: