HP xp8010 series Reference Manual: Managing The Projector; To Find The Ip Address

Hewlett-packard projector reference guide.
Hide thumbs

Advertisement

This chapter explains how you can manage one or more projectors. If the projector
is connected to a network, you can work from a central location by accessing the
projector's embedded web server, rather than being in the same room as the projector.
You can check the projector's current status, change its configuration, program
automatic shutdown times, and upgrade firmware—all from a remote location.
The web interface has been tested on Microsoft Windows 2000 and XP, Mac OS 9
and 10, Internet Explorer 5.5 and above, and Netscape Navigator 7.0 and above.
This chapter covers:
"Managing the Projector" on page 53.
"Upgrading the Projector" on page 56.

Managing the Projector

This section provides the following instructions:
"To find the IP address" on page 53
"To set basic projector properties" on page 54
"To set up email for notifications" on page 55
"To protect configuration changes" on page 55
To find the IP address
Press enter on the projector or remote control to open the on-screen menu. Record
the IP address, shown as a series of numbers on the bottom of the menu.
Press the back button to close the menu.
Reference Guide
System Management
4
53

Advertisement

   Related Manuals for HP xp8010 series

This manual also for:

Xp8020, Xp8000 - digital projector

Comments to this Manuals

Symbols: 0
Latest comments: