Download Print this page

HP xp8010 series Reference Manual: Disconnecting

Hewlett-packard projector reference guide.
Hide thumbs



CAUTION: Do not disconnect power or turn off the projector until the projector has cooled
down (the fan stops) and the power button light stops blinking. Otherwise, you might shorten
the life of the lamp.
1. Press the power button on the projector or remote control to turn off the projector.
The power button blinks during the two-minute cool-down period. Then, the
projector enters Standby mode, which retains network connectivity.
2. You can disconnect video and audio equipment from the projector during the
cool-down period but not the power cord.
If the projector is connected to a network, do not turn off the main disconnect switch
or unplug power. Disconnecting the power breaks the network connection.
3. If you must unplug or remove the projector, wait until the power button light stops
blinking. Then turn off the main disconnect switch on the back of the projector
and unplug the power cord.
If you try to turn on the projector again during the cool-down period, it does not turn
on. Wait until the cool-down period ends and the power button stops blinking.
Reference Guide



   Related Manuals for HP xp8010 series

This manual also for:

Xp8020, Xp8000 - digital projector

Comments to this Manuals

Symbols: 0
Latest comments: