Download Print this page

HP xp8010 series Reference Manual: Remote Control Problems; Networking Problems

Hewlett-packard projector reference guide.
Hide thumbs


Remote control problems

If the remote control does not operate:
If only the mouse and page up and down buttons do not work:
Networking problems
If you cannot access the projector via the web:
Reference Guide
If the indicator light on the front of the remote control blinks
when you press buttons, the remote control is working properly.
If the light does not blink, install two new AAA batteries in the
remote control.
Be sure nothing is blocking the infrared receivers on the front and
back of the projector. Move to within 9 m (30 ft) of the projector.
Open the on-screen menu and select help > Diagnostics. Run
remote control tests.
Be sure you have a USB connection between the projector and the
Open the on-screen menu and select help > Diagnostics. Run
remote control.
Check that you are using the correct IP address. The projector's IP
address is shown in the on-screen menu on the projector.
Check the network cable connections at the projector and at the
Check the left indicator light on the LAN port on the projector. If
the light is not on, the network might not be active. Try a different
cable or check the network outlet at the wall using a computer.
If your model includes an L1581A Advanced Connectivity
Module, see the L1581A manual.
Check whether the projector's IP address shown in the on-screen
menu is 169.254.x.x. If the projector is set to use a DHCP server,
this address means no DHCP server is available. If the projector
does not use a DHCP server, this address means no IP address is


Table Of Contents

   Related Manuals for HP xp8010 series

This manual also for:

Xp8020, Xp8000 - digital projector

Comments to this Manuals

Symbols: 0
Latest comments: