HP xp8010 series Reference Manual: To Set Basic Projector Properties

Hewlett-packard projector reference guide.
Hide thumbs

Advertisement

System Management

To set basic projector properties

1. On a networked computer, open an internet browser, enter the IP address of the
projector in the URL bar, and press Enter. See "To find the IP address" on
page 53 for more information.
2. Depending on the property you want to view or change, go to the location
indicated in the following table.
3. Make any necessary changes and click Apply.
Changing Projector Properties
Projector Property
Status
Web interface language
Picture and audio*
Basic network configuration*
Advanced network configuration
*These properties are also available in the on-screen menu.
54
Location in Web Interface
Home > Device Info
Home > Select Language
Projector
Networking > TCP/IP (or Wired Settings
on certain models)
Networking
Reference Guide

Advertisement

   Related Manuals for HP xp8010 series

This manual also for:

Xp8020, Xp8000 - digital projector

Comments to this Manuals

Symbols: 0
Latest comments: