**【Enter Setup】
RS-232 Interface on CD15 Cradle
Baud Rate
When the CD15 cradle is connected to the Host via serial port, you need to set communication parameters (including
baud rate, parity check, data bit and stop bit) to match the host device.
Baud rate is the number of bits of data transmitted per second. Set the cradle's baud rate to match the Host
requirements. Otherwise, data may not reach the Host or may reach it in distorted form. The default baud rate is
115200.
【Baud Rate 4800】
【Baud Rate 14400】
【Baud Rate 38400】
**【Baud Rate 115200】
【Exit Setup】
【Baud Rate 9600】
【Baud Rate 19200】
【Baud Rate 57600】
46