Coop 25 (Japanese Matrix 2 Of 5); Restore Default Settings; Enable/Disable Coop 25 - Newland NLS-HR15 User Manual

**【Enter Setup】

COOP 25 (Japanese Matrix 2 of 5)

Restore Default Settings

Scan the barcode below to restore all parameters in COOP 25 configuration to the factory default settings. To find the
related default settings, see the "Default Parameters Table" section in Chapter 7.

Enable/Disable COOP 25

COOP 25 is disabled by default.
【Enable COOP 25】
Note: If the scanner fails to identify COOP 25 barcodes, you may first try this solution by scanning the Enter Setup
barcode and then Enable COOP 25 barcode.
【Exit Setup】
【Restore the Default Settings of COOP25】
**【Disable COOP 25】
108