Deutsche 12; Restore Default Settings; Enable/Disable Deutsche 12 - Newland NLS-HR15 User Manual

**【Enter Setup】

Deutsche 12

Restore Default Settings

Scan the barcode below to restore all parameters in Deutsche12 configuration to the factory default settings. To find the
related default settings, see the "Default Parameters Table" section in Chapter 7.

Enable/Disable Deutsche 12

Deutsche12 is disabled by default.
【Enable Deutsche12 But Do Not Transmit Check Digit】
【Enable Deutsche12 and Transmit Check Digit】
Note: It is advised not to enable Deutsche 12 unless necessary, because Deutsche 12, ITF-12 and Interleaved 2 of 5
use the same encoding method and enabling them at the same time can easily cause confusion with each other when
decoding.
【Exit Setup】
【Restore the Default Settings of Deutsche12】
**【Disable Deutsche12】
106