Table of Contents
Advertisement
When the scanner is connected to a host device through its RS-232 interface, serial communication is
enabled by default. However, to ensure smooth communication and accuracy of data, you need to set the
scanner's communication parameters (including baud rate) to match the host's settings. The default
settings of the scanner are 9600bps, no parity check, 8 data bits and 1 stop bit.
** Baud Rate 9600
Baud Rate 2400
Baud Rate 14400
Baud Rate 38400
Baud Rate 115200
21
Chapter 10 RS-232 Interface
Baud Rate 1200
Baud Rate 4800
Baud Rate 19200
Baud Rate 57600
Advertisement
Table of Contents
