Searching For Contacts; Search Source List In Dialing - Yealink SIP-T48G User Manual

To search for a contact in the local directory:
1. Tap .
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is disabled for the directory, tap
Directory ->All Contacts to enter the local directory.
2. Tap Search.
3. Enter a few continuous characters of the contact name or the contact number using
the keypad.
The contacts whose name or phone number matches the characters entered will
appear on the touch screen. You can dial from the result list.
You can search for a contact from the desired lists when the phone is in the pre-dialing
screen. The lists can be Local Directory, History, Remote Phone Book and LDAP .
To configure search source list in dialing via web user interface:
1. Click on Directory->Setting.
2. In the Search Source List In Dialing block, select the desired list from the Disabled
column and click
The selected list appears in the Enabled column.
3. Repeat step 2 to add more lists to the Enabled column.
4. (Optional.) To remove a list from the Enabled column, select the desired list and
then click .
.
Customizing Your Phone
->All Contacts or tap ->
47