Adding Contacts Manually - Yealink SIP-T48G User Manual

You can add contacts to the local directory in the following ways:
Manually

From call history

From remote phone book


Adding Contacts Manually

To add a contact to the local directory manually:
1. Tap .
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is disabled for the directory, tap
Directory ->All Contacts to enter the local directory.
2. Tap the desired contact group.
3. Tap Add.
4. Enter the name and the office, mobile or other numbers in the corresponding fields.
5. Tap the gray box of the Account field.
6. Tap the desired account from the pull-down list.
If Auto is selected, the phone will use the first available account when placing calls
to the contact from the local directory.
7. Tap the gray box of the Ring field.
8. Tap the desired ring tone from the pull-down list.
If Auto is selected, this contact will use the ring tone assigned to the group.
9. Tap the gray box of the Photo field.
10. Tap the desired photo from the pull-down list.
Customizing Your Phone
->All Contacts or tap ->
39