Live Dialpad - Yealink SIP-T48G User Manual

For more information on the valid value of the Account field, refer to
on page 78.
4. Click Confirm to add the block out number.
Note
Block out number is configurable via web user interface only.
You can enable live dialpad on the SIP-T48G IP phone, which enables the IP phone to
automatically dial out the phone number without pressing any other key. You can also
configure a delay, where the phone will dial out the phone number automatically after
the specified period of time.
To enable the live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
Customizing Your Phone
Replace Rule
83