Yealink SIP-T48G User Manual page 62

User Guide for the SIP-T48G IP Phone
4. Enter the name and the office, mobile or other numbers in the corresponding fields.
5. Tap the gray box of the Account field.
6. Tap the desired account from the pull-down list.
If Auto is selected, the phone will use the first available account when placing calls
to the contact from the blacklist directory.
7. Tap the Save soft key to accept the change or
To add a contact to the blacklist directory from the local directory:
1. Tap .
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is disabled for the directory, tap
Directory ->All Contacts to enter the local directory.
2. Tap after the desired contact.
3. Tap Blacklist.
The touch screen prompts the following warning:
4. Tap the OK soft key to confirm the setting.
For operating instructions on editing, deleting, placing calls to and searching for
contacts in the blacklist directory, refer to the operating instructions of
52
to cancel.
->All Contacts or tap
Local Directory
->
on