Yealink SIP-T48G User Manual page 38

User Guide for the SIP-T48G IP Phone
To configure the SNTP settings via phone user interface:
1. Tap ->Basic->Time & Date->General.
2. Tap the gray box of the Type field.
3. Tap SNTP Settings from the pull-down list.
4. Tap the gray box of the Time Zone field.
5. Tap the time zone that applies to your area from the pull-down list.
The default time zone is "+8 China(Beijing)".
6. Enter the domain names or IP addresses of SNTP servers in the NTP Server 1 and
NTP Server 2 fields respectively.
7. Tap the gray box of the Daylight Saving field.
8. Tap the desired value from the pull-down list.
9. Tap the Save soft key to accept the change or
Note
Please refer to
phone.
To configure the time and date manually via phone user interface:
1. Tap ->Basic->Time & Date->General.
2. Tap the gray box of the Type field.
3. Tap Manual Settings from the pull-down list.
28
Appendix A - Time Zones
to cancel.
for the list of available time zones on the IP