Placing Calls - Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
You can place a call in three ways using your SIP-T48G IP phone:
Using the handset

Using the speakerphone

Using the headset

You can also dial the number first, and then choose the way you want to speak to the
other party.
You can also search and dial a contact from the call history, local directory or remote
phone book. For more information, refer to
History Management
During a call, you can alternate between Speakerphone, Headset, and Handset modes
by pressing the Speakerphone key, the HEADSET key, or picking up the handset.
The call duration of call is visible on the touch screen. In the figure below, the call to "Lin"
has lasted 37 seconds.
To place a call using the handset:
1. Pick up the handset.
2. Enter the desired number using the keypad.
88
Contact Management
on page 55.
on page 34 and Call