Yealink SIP-T48G User Manual page 144

User Guide for the SIP-T48G IP Phone
Intercom features you need to know:
Intercom Feature
Accept Intercom
Intercom Mute
Intercom Tone
Intercom Barge
To configure intercom features via phone user interface:
1. Tap ->Call Features->Intercom.
2. Make the desired changes.
3. Tap the Save soft key to accept the change or
These specific parameters are configurable via web user interface at the path
Features->Intercom.
Accept Intercom
You can enable or disable the phone to automatically answer an incoming intercom call.
If Accept Intercom is enabled, the phone automatically answers an incoming intercom
call. If Accept Intercom is disabled, the phone rejects incoming intercom calls and sends
a busy message to the caller. Accept Intercom is enabled by default.
Your administrator can set a period of delay time before the phone automatically
Note
answers intercom calls. Contact your system administrator for more information.
134
Description
Enable or disable the IP phone to automatically
answer an incoming intercom call.
Enable or disable the microphone on the IP phone for
intercom calls.
Enable or disable the IP phone to play a warning
tone when it receives an incoming intercom call.
Enable or disable the IP phone to automatically
answer an incoming intercom call while there is
already an active call on the phone.
to cancel.